About Ross > Facilities > ROSS Engineering
Facilities
ROSS Engineering
53,000 sq. ft. plant on 300,000 sq. ft. of property. 27' vertical lifting capacity.
Lathes:
- (1) HAAS ST 30
- (1) HAAS ST 40
- (1) HAAS ST 40 LT
- (1) 36” ACRA 36x200
- (1) 32” ACRA 32x120
- (1) 18” Sharp 1880L
Mills:
- (1) Vertical Boring Mill 72" Swing x 60" Vertical Travel
- (1) Bridgeport Mills with Rotary Table
- (1) Horizontal Boring Mill, G&L model 70-D5-T, No 5 Spindle
- (1) Mazak Milling Center VTC-200B 44" x 20" x 20"
- (1) Horizontal Boring Mill, 3.5" Spindle
- (1) VF4 HAAS
- (1) VF3 HAAS
Drill Presses:
- (1) Radial Arm, 4' x 15" Column
- (2) MAG Drills, Milwaukee
- (1) Cylindrical Universal Grinder 8" x 18"
- (3) Bench Grinders
- (1) 10" Pedestal Grinder
Saws:
- (1) Vertical Band Saw, 36" Throat
- (1) DoAll Automatic Horizontal Band Saw
Miscellaneous:
- (1) 2 1/4" Shaper
- (1) 25 Ton Hydraulic Press
- (1) #4 Key Seater
- (1) 1-1/4" Key Seater
- (1) Rigid 1224 Pipe Threader
Cranes:
- (2) 20 Ton Bridge Cranes
- (1) 5 Ton Bridge Crane
- (2) 10 Ton Bridge Crane
- (1) 15 Ton Portable Yard Crane
- (16) 1 Ton Jib Cranes
- (1) 2 Ton Jib Crane
Fabrication Shop:
- (1) 10 ga x 4' Plate Bending Roll
- (1) 1/4" x 6' Plate Bending Roll
- (1) 1/2" x 10' Plate Bending Roll
- (1) 1" x 10' Plate Bending Roll
- (1) 40' Fitting Rolls
- (1) 40' Automatic Sub-Arc Station with 1000 Amp Welding Source
- (2) 45 Ton Tank Turning Rolls
- (2) 10 Ton Tank Turning Rolls
- (2) 7.5 Ton Tank Turning Rolls
- (2) 15,000 Lbs Weld Positioners
- (1) 10,000 Lbs Weld Positioners
- (1) 1,500 Lbs Weld Positioners
- (1) 500 Lbs Weld Positioners
- (2) 10' x 10' Weld Manipulator
- (1) 550 Amp Welding Machine (Miller)
- (2) 575 Amp Welding Machine (Hobart)
- (1) 500 Amp Welding Motor Gen (Lincoln)
- (1) SA 800 Welding Motor Gen (Lincoln)
- (1) 350 Delta Weld Welding Machine (Miller)
- (1) VI 400 Welding Machine (Linde)
- (1) 300 Amp Welding Machine (Lincoln)
- (1) 250 Amp Welding Machine (Lincoln)
- (4) 400 Amp Welding Machine
- (3) 300 Amp Welding Machine
- (2) 450 Amp Welding Machine
- (1) 1" Cap. Plasma
- (1) 3/4" Cap. Plasma
- (1) CNC Burning Machine
- (1) Maxiem Waterjet 1530 Omax with a 5' x 10' cutting area and a 30 hp pump
- (1) 100 Ton x 10' Press Brake
- (1) 1/4" x 10' Plate Shear
- (1) 1/2" x 10' Plate Shear
- (1) 200 Ton Dimpling Press
- (1) 1/4" Flanging Machine
- (1) SubArc Flow Welder 650 Amp
- (1) 4" x 4" x 5/8" Structural Angle Rolls
- (1) 7000 lb Forklift
- (1) 5000 lb Forklift
- (1) 340 GPM Transfer Pump
- (1) No. 4 Buffalo Iron Worker
- (1) 2" Plasma Cutter
- (1) Tractor with yard trailer
- (1) Main lift (cherry picker)
- (1) Paint Booth 12'W x 11'D x8'H
- (1) 25 Ton Sand Hoppers
- (1) 6 Ton Blasting Pot
- (2) 300 lb Blasting Pot
- (1) 48" x 48" Glass Bead Blaster
- (1) 650 CFM Air Compressor
- (1) 212 CFM Air Compressor